52 results found
When console is updated, the new install looks for all purchased plugins and automatically installs them instead of manually.
Everytime InControl console is updated I have to repair or reinstall my multi user plugin. Would love for this to be done automatically.2 votes
Available in the general release of version 4.0
Have the ability to play a audio file via Sonos when a scene is activated. I know there are ways to do something similar with computer speakers and phones, but this would be so much simpler and versatile.
- Sonos, near the house entry, playing a greeting when you enter.
- Sonos in the bedroom playing alerts when things happen around the house. (garage door opening, young child's door opening, etc)
- Play dogs barking when sensors are triggered while your away(This is from a competing HA system)3 votes
This has been added and is ready as a beta. You’ll need InControl HA version 3.152 as well as the Sonos Controller installer. Both are linked below.
Just like nexia home lets you type out the person's name and their 4 to 8 digit combination :) This works with the locks only1 vote
RIght clicking the lock and chosing ‘setup lock codes’ allows you to do this. Note that until version 3.97, there was a bug when working with multiple locks.
When a t-stat changes state, it doesn't update in the UI. It continues to report (off)1 vote
This fix will be in version 3.99 of InControl
Add z-wave multi-channel support to InControl76 votes
Completed in version 3.113.
It would be great if time conditions were wider than hours, minutes, seconds...Why not days and months?There are some events that only occur at certain date (i.e. Christmas)2 votes
Available with version 4.0.5819
When I set up a scene I would like to set a % value on the dimmer switches. As I see it now I can view on my phone app the % that the dimmer is set to and keep tapping the slider in my scene set up until it's that percent.4 votes
This has been completed. You can also directly enter the % in the text box.
It’s available in version 3.114
Virtual devices are reset to off after a system reboot.
It would be good if they would retain their status afterward.
As an example: If your power goes off while you are on vacation causing a system reboot, you might have a problem if a virtual device named "Vacation Mode" is cleared as a result.5 votes
Available as of version 3.88
Similar to how the Aeon Labs Key Fob can do this now. Add this ability to the MiniMote.5 votes
This is available in the release version 3.113. Please auto-configure the device then use the “Remote control button” assignment in the scene you’d like to control.
Create a mesh network mapping tool to make it easier to troubleshoot mesh related issues. List mesh neighbors visible to each device, relative signal strengths etc.100 votes
This is in the latest version of InControl under the Tools/Zwave menu.
When I add the thermostat to a scene I only get the options for temperature control. I would like to be able to set a scene to change the System Mode as well as temperature. For instance change the system to Energy efficient mode when out of town.14 votes
Completed in version 3.119: http://email.uservoice.com/c/ZD1kNTImaT01MzllZWVkMjcwZmY5X2Y3ODNmODk5NmRjNTMzNDM1N2YyJTQwdXNlcnZvaWNlLmNvbSZoPTczZjc4OGI4OWZkYjA0ZDRlYzI4NmQ5NGE2NDJlMTgzJmw9aHR0cCUzQSUyRiUyRjhiMDBkYWJhZmI3OWRmOGZkMjlkLWRmODE5ZmJmYTIwYWVkMDc5ZmNiZDNhODM1ZjljY2FkLnIxMy5jZjEucmFja2Nkbi5jb20lMkZJbkNvbnRyb2xJbnN0YWxscyUyRkluQ29udHJvbF9TZXR1cF8zLjExOS5leGUmdHJhY2tpbmdfY29kZT05NzZmY2ZmZTAyNzBlZGQwMTAzM2Y2NzRlMDYzMTQwZCZyPXJ5YW4lNDBpbmNvbnRyb2xoYS5jb20
It would be nice to be able to group and sort devices and scenes Groupings may include device types, rooms, etc and sorting either aphabetically or by ID within each grouping would be great. The current list view allows sorting only but this layout is lost when the console is restarted.37 votes
Add the new Zsmoke smoke alarm from First Alert as a device with level values of "Fire" or "Clear". Or something along those lines.
I don't know if the following would be helpful:
The z-wave command class for alarms (i.e. COMMANDCLASSALARM) to be precise.
The z-wave conformance statement for the ZSMOKE is at http://products.z-wavealliance.org/products/863/pics and the ZCOMBO is at http://products.z-wavealliance.org/products/862/pics19 votes
Initial alpha release is ready with this device. Available in version 3.89+ (http://www.incontrolzwave.com/page/Download.aspx). As this is an alpha, please notify us of your use of this version and if you experience any problems.
This will be available after version 3.55
When adding a dim level for a device in a scene, there's a slider control but no numeric indicator like there is on the device icon list 0-99. This would be good as it's always a little hit and miss when you're trying to get lighting levels just right.2 votes
Available in version 3.114
If a command -- such as turning a device on/off -- does not get acknowledged by the receiving device, notify the user.2 votes
When you activate a scene from the scene list, a visual confirmation would be nice. Currently, the buttons don't indicate that they've been pressed (like the other device buttons etc do).2 votes
This will be completed in the upcoming store release.
When I resume the app / relaunch from the background, I get a connection error with a button to re-connect. This method to manually reconnect is fine but could use 2 minor enhancements:
- Reword the message so that it doesn't read like an error
- Provide a visual aid (progress bar/spinning wheel) to indicate that a refresh is actually occuring after the "reconnect" button is pressed so that the user knows when it has completed successfully.1 vote
This will be available in the next App store update.
Maybe under a settings tab to have people vote and post ideas. I use it on my app and is very mobile friendly.1 vote
- Don't see your idea?