General
52 results found
-
Phone notifications
Have the IC app produce notifications on your phone/tablet. Alerting you to events such as doors opening, motion detected and allowing you to launch right into the app. The ability to control what triggers a notification will be good. This ability will really be key if IC plans to add any cool features that could become available through the new Android Wear!!
21 votesAvailable now as a beta test from the Google+ test group. Will also be generally available in the 4.0 release. Requires the paid Android app and version 4.0+ of InControl.
-
Lock events user codes/IDs to be sent back to InControl.
One of the main functions that drive most people to Z-wave is specific notifications. All of the services that are being deployed focus on key selling points, and one of these is "user" specific notifications. Child #1 is home, Child #2 is home, and so on.
I would say in the lock code set location, an entry be added for a "text" name. When this event is sent to InControl, the name variable can be pulled into the alert.
5 votesAvailable in InControl version 4.0 from www.incontrolha.com
-
When console is updated, the new install looks for all purchased plugins and automatically installs them instead of manually.
Everytime InControl console is updated I have to repair or reinstall my multi user plugin. Would love for this to be done automatically.
2 votesAvailable in the general release of version 4.0
-
Be able to put in people's combinations via computer app and mobile app
Just like nexia home lets you type out the person's name and their 4 to 8 digit combination :) This works with the locks only
1 voteRIght clicking the lock and chosing ‘setup lock codes’ allows you to do this. Note that until version 3.97, there was a bug when working with multiple locks.
-
Allow a scene to play a specific audio file on a selected Sonos speaker.
Have the ability to play a audio file via Sonos when a scene is activated. I know there are ways to do something similar with computer speakers and phones, but this would be so much simpler and versatile.
Examples:
- Sonos, near the house entry, playing a greeting when you enter.
- Sonos in the bedroom playing alerts when things happen around the house. (garage door opening, young child's door opening, etc)
- Play dogs barking when sensors are triggered while your away(This is from a competing HA system)3 votesThis has been added and is ready as a beta. You’ll need InControl HA version 3.152 as well as the Sonos Controller installer. Both are linked below.
InControl Update: (https://storage101.dfw1.clouddrive.com/v1/MossoCloudFS_d2a1ce0f-9baf-4b26-819f-d4d6d3ebfe2b/InControl/InControlInstalls/InControl_Setup_3.152.exe).
New Sonos Controller: https://storage101.dfw1.clouddrive.com/v1/MossoCloudFS_d2a1ce0f-9baf-4b26-819f-d4d6d3ebfe2b/InControl/InControlInstalls/SonosController-2.1.msi
-
Have GUI Server support OPTIONS header for Web
Ryan, could you modify the gui server on port 1178 to accept the options data that my sceneName javascript post sends so I could use my javascript code? The server is giving a 405 when it gets the data but all it needs is there (password, sceneName, activate) . I really only need the activatescenepost to work to get what I want.
1 vote -
Wide time condition
It would be great if time conditions were wider than hours, minutes, seconds...Why not days and months?There are some events that only occur at certain date (i.e. Christmas)
2 votesAvailable with version 4.0.5819
-
InControl Channel for IFTTT App
Would be great to have IFTTT Channel for InControl so we can use location service and other service integrate with InControl. Right now Wemo, Philipps HUE, SmartThings do have existing channels so it would be great if InControl would also check this out and implment InControl Channel for IFTTT App
71 votesThe “Make Channel” on IFTTT allows Axial Control to work. You can use the scene “Http Command” to interface with this channel.
-
Virtual devices retain status after system reboot.
Virtual devices are reset to off after a system reboot.
It would be good if they would retain their status afterward.
As an example: If your power goes off while you are on vacation causing a system reboot, you might have a problem if a virtual device named "Vacation Mode" is cleared as a result.5 votesAvailable as of version 3.88
-
Show dimmer level % in scene set up.
When I set up a scene I would like to set a % value on the dimmer switches. As I see it now I can view on my phone app the % that the dimmer is set to and keep tapping the slider in my scene set up until it's that percent.
4 votesThis has been completed. You can also directly enter the % in the text box.
It’s available in version 3.114
-
Allow the Aeon Labs MiniMote 4-Button Controler to activate InControl Scenes.
Similar to how the Aeon Labs Key Fob can do this now. Add this ability to the MiniMote.
5 votesThis is available in the release version 3.113. Please auto-configure the device then use the “Remote control button” assignment in the scene you’d like to control.
-
Multi-Channel Support
Add z-wave multi-channel support to InControl
76 votesCompleted in version 3.113.
-
Set Thermostat Mode
When I add the thermostat to a scene I only get the options for temperature control. I would like to be able to set a scene to change the System Mode as well as temperature. For instance change the system to Energy efficient mode when out of town.
14 votes -
Create a mesh network map
Create a mesh network mapping tool to make it easier to troubleshoot mesh related issues. List mesh neighbors visible to each device, relative signal strengths etc.
100 votesThis is in the latest version of InControl under the Tools/Zwave menu.
-
5 votes
This will be available after version 3.55
-
Dimmer levels for scenes
When adding a dim level for a device in a scene, there's a slider control but no numeric indicator like there is on the device icon list 0-99. This would be good as it's always a little hit and miss when you're trying to get lighting levels just right.
2 votesAvailable in version 3.114
-
Grouping and sorting of devices and scenes
It would be nice to be able to group and sort devices and scenes Groupings may include device types, rooms, etc and sorting either aphabetically or by ID within each grouping would be great. The current list view allows sorting only but this layout is lost when the console is restarted.
37 votes -
iPhone App: Scene activation confirmation
When you activate a scene from the scene list, a visual confirmation would be nice. Currently, the buttons don't indicate that they've been pressed (like the other device buttons etc do).
2 votesThis will be completed in the upcoming store release.
-
iPhone App: Reconnect error
When I resume the app / relaunch from the background, I get a connection error with a button to re-connect. This method to manually reconnect is fine but could use 2 minor enhancements:
- Reword the message so that it doesn't read like an error
- Provide a visual aid (progress bar/spinning wheel) to indicate that a refresh is actually occuring after the "reconnect" button is pressed so that the user knows when it has completed successfully.1 voteThis will be available in the next App store update.
-
Add Zsmoke smoke detector
Add the new Zsmoke smoke alarm from First Alert as a device with level values of "Fire" or "Clear". Or something along those lines.
I don't know if the following would be helpful:
The z-wave command class for alarms (i.e. COMMANDCLASSALARM) to be precise.The z-wave conformance statement for the ZSMOKE is at http://products.z-wavealliance.org/products/863/pics and the ZCOMBO is at http://products.z-wavealliance.org/products/862/pics
19 votesInitial alpha release is ready with this device. Available in version 3.89+ (http://www.incontrolzwave.com/page/Download.aspx). As this is an alpha, please notify us of your use of this version and if you experience any problems.
- Don't see your idea?