General
52 results found
-
5 votes
This will be available after version 3.55
-
Lock events user codes/IDs to be sent back to InControl.
One of the main functions that drive most people to Z-wave is specific notifications. All of the services that are being deployed focus on key selling points, and one of these is "user" specific notifications. Child #1 is home, Child #2 is home, and so on.
I would say in the lock code set location, an entry be added for a "text" name. When this event is sent to InControl, the name variable can be pulled into the alert.
5 votesAvailable in InControl version 4.0 from www.incontrolha.com
-
5 votes
Available as of version 4.0.5817
-
Virtual devices retain status after system reboot.
Virtual devices are reset to off after a system reboot.
It would be good if they would retain their status afterward.
As an example: If your power goes off while you are on vacation causing a system reboot, you might have a problem if a virtual device named "Vacation Mode" is cleared as a result.5 votesAvailable as of version 3.88
-
Allow the Aeon Labs MiniMote 4-Button Controler to activate InControl Scenes.
Similar to how the Aeon Labs Key Fob can do this now. Add this ability to the MiniMote.
5 votesThis is available in the release version 3.113. Please auto-configure the device then use the “Remote control button” assignment in the scene you’d like to control.
-
Show dimmer level % in scene set up.
When I set up a scene I would like to set a % value on the dimmer switches. As I see it now I can view on my phone app the % that the dimmer is set to and keep tapping the slider in my scene set up until it's that percent.
4 votesThis has been completed. You can also directly enter the % in the text box.
It’s available in version 3.114
-
Bug: ZStick with Incontrol sometimes contains Ghost Switches
I have ZStick series 2 with updated firmware in conjunction with most recent version of Incontrol. It is possible to have a non-functioning device in Incontrol that is impossible to delete without doing a complete stick reset. I have seen two causes for this. One night I noticed my front porch light was not turning on. I thought I may need to reset incontrol but that didn't make a difference. I could control all my other devices, but just not this one. I then took my ZStick, put it into add mode, then tried to add the switch back and…
4 votes -
Add Refresh Button to update the state of a device within the android app
Occasional issues with the state of a device would be fixed with a refresh button within the incontrol android app itself. Rather than compelete
4 votesThis will be completed in the next release of the Android app.
-
add an option under scenes/devices/Add Device for add send email notification.
This would be a way to send email without having to use a script. It could have subject/body variables, and possibly even to/from settings, and support substitution text.
4 votesThis is available in version 4.0.5719+
-
Allow a scene to play a specific audio file on a selected Sonos speaker.
Have the ability to play a audio file via Sonos when a scene is activated. I know there are ways to do something similar with computer speakers and phones, but this would be so much simpler and versatile.
Examples:
- Sonos, near the house entry, playing a greeting when you enter.
- Sonos in the bedroom playing alerts when things happen around the house. (garage door opening, young child's door opening, etc)
- Play dogs barking when sensors are triggered while your away(This is from a competing HA system)3 votesThis has been added and is ready as a beta. You’ll need InControl HA version 3.152 as well as the Sonos Controller installer. Both are linked below.
InControl Update: (https://storage101.dfw1.clouddrive.com/v1/MossoCloudFS_d2a1ce0f-9baf-4b26-819f-d4d6d3ebfe2b/InControl/InControlInstalls/InControl_Setup_3.152.exe).
New Sonos Controller: https://storage101.dfw1.clouddrive.com/v1/MossoCloudFS_d2a1ce0f-9baf-4b26-819f-d4d6d3ebfe2b/InControl/InControlInstalls/SonosController-2.1.msi
-
3 votes
Requires latest version of InControl HA (4.0) found at www.incontrolha.com
-
Dimmer levels for scenes
When adding a dim level for a device in a scene, there's a slider control but no numeric indicator like there is on the device icon list 0-99. This would be good as it's always a little hit and miss when you're trying to get lighting levels just right.
2 votesAvailable in version 3.114
-
Instantly notify when a device does not ACK a command
If a command -- such as turning a device on/off -- does not get acknowledged by the receiving device, notify the user.
2 votesCompleted
-
add an option on android app so the user can choose the strartup screen
It would be very nice if for example the android app starts by showing scenes instead of the powered on devices
2 votes -
Fix UI quirks
Aeon Labs Smart strips and outlet modules can provide power metering information, kWh and Watts. When viewing device details in the UI sometimes those two table entries exist, other times one or the other will disappear. Between times of correct display and incorrect display nothing else happens - no scenes have been triggered, no devices have been manually actuated, nothing. One moment the values are there, minutes or even an hour later, the table only shows Battery, no Electric, no Instant Watts. Then, an hour or so later one or both my suddenly reappear.
2 votes -
When console is updated, the new install looks for all purchased plugins and automatically installs them instead of manually.
Everytime InControl console is updated I have to repair or reinstall my multi user plugin. Would love for this to be done automatically.
2 votesAvailable in the general release of version 4.0
-
Enable renaming of Scenes
I have several scenes that are fairly complex and their purpose has evolved over time. I cannot easily rename these scenes, I would have to create a new one and start from scratch.
2 votesHi Luke – you can already rename a scene. Here’s some info: http://docs.incontrolha.com/home/scenes
-
Wide time condition
It would be great if time conditions were wider than hours, minutes, seconds...Why not days and months?There are some events that only occur at certain date (i.e. Christmas)
2 votesAvailable with version 4.0.5819
-
iPhone App: Scene activation confirmation
When you activate a scene from the scene list, a visual confirmation would be nice. Currently, the buttons don't indicate that they've been pressed (like the other device buttons etc do).
2 votesThis will be completed in the upcoming store release.
-
Add this uservoice to your mobile apps to lets users vote and post ideas ;)
Maybe under a settings tab to have people vote and post ideas. I use it on my app and is very mobile friendly.
1 vote
- Don't see your idea?