Skip to content

Linear/GoControl QuickStick HUSBZ-1 Driver Install

To check if your Go Control QuickStick has the correct drivers installed, you should do the following:
  1. Open the Device Manager
  2. Expand the section called "Ports (COM & LPT)"
  3. Look for a section called "UZB (COM x)" 
The COM port you are using will be at the end of the line. It might say (COM4) for example -- which means you are on port 4.

If you don't see a "UZB" device listed, you may need to install drivers:
  1. Open your InControl folder (usually C:\Program Files (x86)\Moonlit Software, LLC\InControl HA\drivers\UZB)
  2. Right click the UZB.inf file and choose "Install"

Feedback and Knowledge Base