I have several scenes that are fairly complex and their purpose has evolved over time. I cannot easily rename these scenes, I would have to create a new one and start from scratch.2 votes
Hi Luke – you can already rename a scene. Here’s some info: http://docs.incontrolha.com/home/scenes
I'd like to be able to use a devices battery level to activate a scene. IE if my doorlock battery becomes 10 percent or less, then I am sent a push notification reminding me to change the batteries.1 vote
This is already possible; you can click the icon next to your battery report to create a virtual device. Using that virtual device as a trigger, you can execute a scene at a certain battery level.
Philips hue is controllable via a plugin found at incontrolha.com
Aeon Labs Smart strips and outlet modules can provide power metering information, kWh and Watts. When viewing device details in the UI sometimes those two table entries exist, other times one or the other will disappear. Between times of correct display and incorrect display nothing else happens - no scenes have been triggered, no devices have been manually actuated, nothing. One moment the values are there, minutes or even an hour later, the table only shows Battery, no Electric, no Instant Watts. Then, an hour or so later one or both my suddenly reappear.2 votes
Could request additional notifications?1000/month is not enought! thanks1 vote
There’s a way to add 1000 more notifications to your account if you login to incontrolha.com and visit your notification section.
This would be a way to send email without having to use a script. It could have subject/body variables, and possibly even to/from settings, and support substitution text.4 votes
This is available in version 4.0.5719+
Requires latest version of InControl HA (4.0) found at www.incontrolha.com
Available as of version 4.0.5817
Requires InControl version 4.0+
Include support for the new Lowes Garage Door openers: www.linearcorp.com/product_detail.php?productId=1719
I would like to see support added for the security device type garage door opener, specifically the model here: www.linearcorp.com/product_detail.php?productId=171910 votes
This is complete. To download and test, please see the info in the forum: http://store.incontrolzwave.com/boards/topic/580/lowes-garage-door-controller/page/3#2944
I have ZStick series 2 with updated firmware in conjunction with most recent version of Incontrol. It is possible to have a non-functioning device in Incontrol that is impossible to delete without doing a complete stick reset. I have seen two causes for this. One night I noticed my front porch light was not turning on. I thought I may need to reset incontrol but that didn't make a difference. I could control all my other devices, but just not this one. I then took my ZStick, put it into add mode, then tried to add the switch back and it wouldn't take it. I then put the ZStick into delete mode, and I could then delete it and re-add it. So once I have my Incontrol updated, I now have 2 switches. One is a standardswitch which is my current front porch, and the other is my old "Front Porch" switch. So I delete my "Front Porch" from Incontrol and rename the other switch. At this point everything works again. I have to re-add the new "Front Porch" to my scenes. The problem is that when a netowrk update is recieved or a heal occurs another standard switch appears that is a ghost. It doesn't opperate anything or is real in any way, if I delete it, it will just come back. Zombie switch may have been a better description because they just don't die. In conjunction with another bug I posted, if I send a turn on command to the zombie switch, Incontrol will tell me that the zombie switch is on when it doesn't even exist. I don't know if this issues is in Incontrol or the Zstick. It has persisted over several updates for ZStick and Incontrol both. I have had this setup for 1.5 years and to this day I have this issue. My guess is having a way to delete a device out of the ZStick without that device being present may be the best approach. I have also had this issue when trying to add new devices to the network. Thanks!
I have ZStick series 2 with updated firmware in conjunction with most recent version of Incontrol. It is possible to have a non-functioning device in Incontrol that is impossible to delete without doing a complete stick reset. I have seen two causes for this. One night I noticed my front porch light was not turning on. I thought I may need to reset incontrol but that didn't make a difference. I could control all my other devices, but just not this one. I then took my ZStick, put it into add mode, then tried to add the switch back and…4 votes
Full support for Schlage z-wave (nexia) supported locks is a must. These are very popular locks and have very limited support from InControl. Basically just lock/unlock are currently supported which is really a disappointment considering how many features these locks have and how popular they are. Full support for the FE599NX and the BE469NX, would be a great start. These being the 2 most popular of the z-wave capable Schlage locks.17 votes
Support for user code detection added in version 4.0
Have the IC app produce notifications on your phone/tablet. Alerting you to events such as doors opening, motion detected and allowing you to launch right into the app. The ability to control what triggers a notification will be good. This ability will really be key if IC plans to add any cool features that could become available through the new Android Wear!!21 votes
Available now as a beta test from the Google+ test group. Will also be generally available in the 4.0 release. Requires the paid Android app and version 4.0+ of InControl.
It has wifi built into it and is already on my network. Their mobile phone app is fine, but it would be so much better having it all in my InControl HA. The Nest is full of useful information and controls.6 votes
Available via plugin from www.incontrolha.com
One of the main functions that drive most people to Z-wave is specific notifications. All of the services that are being deployed focus on key selling points, and one of these is "user" specific notifications. Child #1 is home, Child #2 is home, and so on.
I would say in the lock code set location, an entry be added for a "text" name. When this event is sent to InControl, the name variable can be pulled into the alert.5 votes
Available in InControl version 4.0 from www.incontrolha.com
Please add IR functionality to your software. I would think people trying to integrate home automation won't want to use a remote or different application to control all there equipment using IR.1 vote
Please see this other idea for implementation of IR and A/V equipment: http://incontrolha.uservoice.com/forums/218427-general/suggestions/4291408-ir-solution
When console is updated, the new install looks for all purchased plugins and automatically installs them instead of manually.
Everytime InControl console is updated I have to repair or reinstall my multi user plugin. Would love for this to be done automatically.2 votes
Available in the general release of version 4.0
Have the ability to play a audio file via Sonos when a scene is activated. I know there are ways to do something similar with computer speakers and phones, but this would be so much simpler and versatile.
- Sonos, near the house entry, playing a greeting when you enter.
- Sonos in the bedroom playing alerts when things happen around the house. (garage door opening, young child's door opening, etc)
- Play dogs barking when sensors are triggered while your away(This is from a competing HA system)3 votes
This has been added and is ready as a beta. You’ll need InControl HA version 3.152 as well as the Sonos Controller installer. Both are linked below.
Just like nexia home lets you type out the person's name and their 4 to 8 digit combination :) This works with the locks only1 vote
RIght clicking the lock and chosing ‘setup lock codes’ allows you to do this. Note that until version 3.97, there was a bug when working with multiple locks.
When a t-stat changes state, it doesn't update in the UI. It continues to report (off)1 vote
This fix will be in version 3.99 of InControl
- Don't see your idea?